NEWS

Press Release

High Cycle Speeds With OnTheFly CT

One benefit of computed tomography is that the workpiece is captured completely, including undercuts and internal geometries. Historically, computed tomography has been too slow for measurements during the manufacturing process. For years, real-time reconstruction in WinWerth® in parallel with image […]

[READ MORE]

Press Release

Metrology For The Future

Electronic components such as plug connectors are getting smaller, presenting ever greater challenges for manufacturing.  ERNI Electronics uses 3D CNC multisensor measuring machines to secure its manufacturing processes, one of which has mastered X-ray computed tomography.  Modern metrology allows rapid […]

[READ MORE]

Press Release

Reduce Costs with Precise Coordinate Metrology

Flexible multisensor coordinate metrology is finding increased use in incoming inspection and production monitoring for complex workpieces.  There is always a choice to be made between faster or more precise sensors and machines.  As a result, the evaluation of measurement […]

[READ MORE]

Press Release

Flexible Zoom Optics

An image processing sensor with zoom optics supports different magnifications, thus expanding the potential applications of the coordinate measuring machine.  A change in magnification, however, also affects the other parameters of the zoom optics.  This must be taken into consideration […]

[READ MORE]

Press Release

Comparison of Distance Sensors

There are a great many contact and non-contact sensors for measuring workpiece surfaces.  Depending on the measurement task and the surface properties, a suitable sensor is selected.  The greatest flexibility comes with different sensors in a single measuring machine. For […]

[READ MORE]

Press Release

A “Sharp” Look into the Workpiece

When selecting a coordinate measuring machine with a computed tomography sensor system, the resolution required for the measurement task must be considered.  The interplay of the detector, X-ray source, and location of the workpiece is critical.  If the machine components […]

[READ MORE]

Press Release

Scanning With and Without A Defined Path

Scanning is a way to capture the geometries of workpieces with a lot of points in a reliable process, to measure dimensions, shape, and orientation in a functionally correct manner.  Contour scanning uses a feedback control algorithm in conjunction with […]

[READ MORE]

Press Release

The Application Determines the Sensor

Selecting the right measuring equipment for dimensional measurement tasks is very important.  The basic approach is:  THE APPLICATION DETERMINES THE SENSOR.  The user needs to consider various aspects when making this decision. Multisensor Coordinate Measuring Machines due to their high […]

[READ MORE]

Product News

Accuracy, Efficiency and Service lead to Customer Satisfaction

Werth delivers value added solutions. Isometric Micro Molding is the only micro molding company in the world with four in-house key capabilities for successful micro molding. An integral part of their setup is the Werth TomoScope – the most accurate […]

[READ MORE]

Press Release

Werth WMS Multisensor System – Plug and Play

With the WMS Multisensor System multisensor technology is now perfectly integrated. This universal interface permits the exchange of various sensors at the identical position on the measuring machine, e.g. conventional touch probes, the WCP Werth Contour Probe, lens attachments, angular […]

[READ MORE]

Press Release

World’s Most Accurate Coordinate Measuring Machine with Computed Tomography Sensor – Werth TomoCheck® HA 200

The new TomoCheck® HA (High Accuracy) 200 from Werth Messtechnik GmbH has impressive new features. By combining transmission tubes with up to 225 kV acceleration voltage and large, high-resolution detectors, both multi-material assemblies and large-volume workpieces can be measured at high […]

[READ MORE]

Press Release

Artifact Correction – Virtual or Multisensor-Based?

The term Autocorrection was coined by the Werth Messtechnik company with the introduction of the first coordinate measuring machines with computed tomography (CT) in 2005. Thanks to the greatly improved precision of CT, the original multisensor method is now used […]

[READ MORE]

Press Release

VideoCheck UA with 3D-WFP Werth Fiber Probe – High-precision Tactile-Optical 3D Measurement of Micro-Components

The VideoCheck UA (Ultra Accuracy) multisensor coordinate measuring machine provides unique technical properties for precision applications. Special air bearing technology, integrated vibration isolation, temperature-stable encoder systems with better than 1-nanometer resolution, and a special drive system all support reproducibility in the […]

[READ MORE]

Press Release

Measure tools and shafts with multisensors—quickly and accurately

The ScopeCheck V and VideoCheck V machine series from Werth Messtechnik GmbH have the perfect solution for precision measurement of challenging, rotationally symmetric components. In contrast to classic shaft measuring machines, where only 2D dimensions can be determined using transmitted […]

[READ MORE]

Press Release

Measure Tools with High Precision

The Werth VideoCheck V HA is the world’s most precise multisensor coordinate measuring machine for tool applications. Its precision air bearings and solid granite design, together with a high-precision rotary axis, achieve levels of measuring uncertainty that allow tools with tolerances […]

[READ MORE]

Press Release

Reliable Measurements Despite Unreliable Temperatures

Every measurement result is associated with a measurement uncertainty that is influenced by numerous factors. In addition to the measuring machine, the operator, the measuring object, and the features to be measured, the environmental conditions are a factor that is […]

[READ MORE]

Press Release

Optical 3D Sensors for Measuring Micro-Features

Due to their “non-contact probing”, optical sensors are very well suited for high-precision 2D and 3D measurements of micro-features. A large number of measurement points can be captured very quickly and easily. The application-specific resolution can be adjusted very easily […]

[READ MORE]

Press Release

Measure Tools Quickly, Easily, and Precisely

The NanoMatic, a CNC measuring machine for rapid production monitoring of tooling, combines the benefits of proven Werth coordinate measuring machines and Tool MT’s more than 20 years of experience in tool metrology. With a design that dampens vibration and […]

[READ MORE]

Press Release

EasyScope – 3D manual measuring microscope with automatic image processing

Werth Messtechnik offers even the manual entry level model of the EasyScope series with automatic image processing and autofocus function for measuring in the vertical axis. This puts the EasyScope well ahead of all other manual video measuring machines. Of […]

[READ MORE]

Press Release

Werth 3D-Patch – HDR Increases Performance for measurement of Topographies with Focus Variation

The 3D-Patch/S is available for all Werth Messtechnik coordinate measuring machines, including retrofitting of existing machines. A light control algorithm adjusts the intensity of illumination automatically to the workpiece surface. Werth coordinate measuring machines offer the possibility to apply the […]

[READ MORE]

Press Release

Measuring Heavy Workpieces from All Directions

The ScopeCheck MB from Werth Messtechnik GmbH was designed specifically for the measurement of large and heavy work pieces. The position of the sensors is adjusted with the moving bridge, so it is not necessary to move the work piece […]

[READ MORE]

Press Release

3D Scanning Technology even for Tiny Spaces

The ultra compact Werth ScopeCheck® S Probe coordinate measuring machine has advanced scanning capability, giving it a very good price-to-performance ratio. The measurement range is 400 mm in the X axis, 200 mm in the Y axis, and 200 mm […]

[READ MORE]

Press Release

Increased Efficiency for High-Resolution Measurements

Region of Interest” (ROI) tomography was developed to create high-resolution images of some regions of larger work pieces. In the past, the entire work pieces always had to be fully scanned at high resolution. ROI-CT only measures the relevant area […]

[READ MORE]

Press Release

Measuring High-Precision Master Workpieces

Precision requirements for work pieces are becoming more demanding and are often in the micrometer range. This means that requirements for master workpieces for gaging benches and machines as used in the automotive industry are also increasing. The VideoCheck® V […]

[READ MORE]

Press Release

WinWerth® 8.40 – the Tactile and Optical Interface of Choice

The new version 8.40 of WinWerth® has a number of additional functions. The expansion of scan path and point distribution modes to cover all standard geometric elements eliminates the need for time-consuming manual positioning of the sensor. The risk of […]

[READ MORE]

Press Release

Werth Gives Insight to Multi-Material Workpieces

In coordinate measuring technology with computed tomography (CT), the dimensional analysis of work pieces made of multiple materials is particularly challenging. Werth Messtechnik has developed a unique solution. Multi-material work pieces are often metal and plastic components, such as assembled […]

[READ MORE]

Press Release

Reproducible and exact measurement results for measurement lab and production inspection

The unique design of the Werth VideoCheck S with constant tension guides ensures high precision and long term stability. In this guideway system magnetic and gravitational forces produce the preload for the X and Y axis. This prevents changes in […]

[READ MORE]

Press Release

VideoCheck® DZ Fixed Bridge Machines – Multisensors Converge

For many years the VideoCheck® coordinate measuring machines have proven the value of measuring with multiple sensors mounted on two independent Z rams. The risk of a collision between sensor and work piece is substantially reduced because the sensors that […]

[READ MORE]

Press Release

Cost-effective Quality Control in Manufacturing

With a measurement range of up to 3500 mm in the X axis and 1750 mm in the Y axis, the ScopeCheck® FB is designed for measuring large-volume workpieces close to the manufacturing process. Its solid construction with a fixed […]

[READ MORE]

Press Release

Measuring Nozzles with X-ray Tomography and Werth Fiber Probe

For many years, measuring fuel injector nozzles has been part of the standard repertoire at Werth Messtechnik GmbH. Typically, the injector hole diameters of just a few tenths of a millimeter are measured using VideoCheck multisensor coordinate measuring machines with […]

[READ MORE]

Press Release

Tactile Measurement at the Highest Level

By combining the Werth VideoCheck® UA multisensor coordinate measuring machine with the highly accurate SP80 probe system from Renishaw, length measurement deviations MPE E of (0.5 + L / 600) µm can be realized. Very good results are also obtained […]

[READ MORE]

Press Release

Werth Fiber Probe – Precision Measurement of 3D Micro-Structures

With several hundred installations worldwide, the Werth Fiber Probe, developed in co-operation with the Physikalisch-Technische Bundesanstalt (PTB – German National Metrology Institute), is currently the most commonly used micro-probe. It has been used for many years to measure micro-gears, gages, […]

[READ MORE]

Press Release

Multisensor Systems – Perfectly Integrated: The New ScopeCheck FB

The ScopeCheck® series of measuring machines permits optimal measuring with each sensor. Using the dual ram approach and the Werth multisensor interface, collision-free measurements with multiple sensors can now be used on the shop floor. In essence, two coordinate measuring […]

[READ MORE]

Press Release

Non-Contact Management of Complete Workpieces with Intelligent Raster Technology

Raster scanning can be used to capture large areas with high structural resolution automatically. The image processing sensor is continuously in motion as many overlapping images are recorded at a high frequency. A reconstruction process integrates these images into one […]

[READ MORE]

Press Release

Werth Coordinate Measuring Machines with CT Sensor

Coordinate measuring machines with computed tomography sensors have become a practically indispensable part of modern quality control. When the Werth TomoScope® 200 was presented at the Control trade show in Sinsheim in 2005, a new era in coordinate measuring technology […]

[READ MORE]