In order to be able to carry out three-dimensional (3D) measurements of workpieces with optical sensors, a method for measurements along the third coordinate axis is required in addition to the image processing sensor. One such distance sensor is the […]

With optical sensors, many measurement points are captured very quickly or even simultaneously. For this reason, they are used for a wide variety of workpieces in production monitoring. Due to their flexible application options, image processing is part of the […]

The selection of the sensor for multi-sensor applications must always be made taking into account the measuring task. Economic aspects such as measuring time and costs also play a role. The structure of the sensors consisting of mechanics, optics, electronics […]

The wall thickness of containers is an important parameter in the packaging industry, for example for bottles. It determines whether the packaging has the required strength or whether perhaps even too much material is used, which can cause not inconsiderable […]

To achieve high resolution, the distance between the workpiece and the X-ray tube must be very small. If it is large, flat workpieces such as printed circuit boards are to be tomographed, the large aspect ratio could lead to a […]

Conventional algorithms allow automatic and sufficiently accurate determination of surface points without prior information about the workpiece (e.g., CAD model or STL point cloud of a master part) only for measuring objects made of one material. With the new WinWerth® […]

With Spiral (Helical) Tomography, the measuring object is moved screw-like along the rotary axis as it rotates. This has the benefit that all parts of the measuring object are irradiated horizontally from the source to the detector at least once. […]

Some workpieces, such as thin sheet metal, must not be contacted or moved, but are also too large and hea­vy for rotary axes. In such cases, a multisensor capa­ble rotary/tilt head is needed for measurement on both sides. The WRT […]

Werth TomoScope® coordinate measuring systems with computed tomography offer high measuring speed at high resolution. Transmission tubes with 80 W tube power allow measurements up to five times faster than conventional reflection tubes with the same structural resolution. OnTheFly CT for […]

Since its foundation in 1817, the Senckenberg Society for Nature Research has been researching the deve­lopment of the earth and the importance of biodiversity. The Senckenberg Natural History Museum at the main site in Frankfurt am Main is one of […]

With the high-precision machines of the VideoCheck® S series, the potential of the most accurate sensors can be fully exploited. The multisensor technology with large sensor selection allows the economical solution of many measurement tasks with one machine. Werth offers […]

Werth has further improved the accuracy of its computed tomography and multi-sensor coordinate measuring machines. The new TomoScope® S Plus 240 impresses with double the measuring volume, the VideoCheck® UA with a unique specification and the new VideoCheck® S with up to three […]

By merging several sensors into a multisensor, costs are reduced and operation is simplified. The Chromatic Focus Zoom offers high flexibility and accuracy for non-contact measurements without sensor offset in all three spatial directions. After integrating the Werth Laser Probe […]

Fast measurement with high resolution in compact design These X-ray sources in monoblock design, unique in the market, enable measurements in high resolution with extremely short measuring times. By using transmission targets, these tubes offer focal spot sizes of a […]

With plastic gears, often all teeth have to be measured due to the manufacturing process. Computed tomography allows the entire workpiece to be captured in a single measuring process, thus achieving an enormous time advantage. Using the CT data, gear […]