With high speed and precision, workpieces can be fully captured by X-ray computed tomography. For measurements in parallel with production, however, this method has often been too slow. A new type of machine now combines the advantages of various classes […]

Figure: Fiber structure of a filter (left) and penetration depth of particles (right, view from inside the workpiece onto the surface) with dimensions in the single-digit micrometer range. A new machine solution from Werth Messtechnik combines a submicrofocus tube and […]

A connector usually contains several stamped and bent parts that must be manufactured with high precision. In order to prove and document the required quality (and ultimately to optimize the process), Unimet has invested in four Werth Videocheck  multisensor measuring […]

Figure 1: Laser sensor using the Foucault principle integrated into an image processing sensor (illumination systems not shown). Optical Sensor Technology in Coordinate Metrology In coordinate measuring technology, mainly tactile and optical sensors and X-ray computed tomography are used. Optical […]

Figure 1. Calculating volume data by back projection of the filtered radiographic images: a) Object, b) X-ray beam path in one section plane, c) Principle of stepwise back projection and superimposing, d) Result of reconstruction with different numbers of back […]

Measurement technology has always played a central role at the stamping and bending technology specialist Johann Vitz in Velbert. Managing Director Michael Vitz is convinced that the 3D multisensor coordinate measuring technology from Werth in particular secures a competitive edge […]

Figure 1. Measurement of a micro gear with the Werth Fiber Probe – the fiber is guided in a metal tube. Flexible and Surface Independent Sensors In coordinate metrology, mainly tactile and optical sensors, as well as X-ray computed tomography, […]

Fig. 1. One of Werth’s newest computed x-ray tomography machines the TomoScope XS Plus Measure as Accurately as a Probe or Optics Using Computed Tomography in Coordinate Metrology PRACTICAL TIP For precise measurements with X-ray computed tomography (CT), Autocorrection based […]

For years, toolmaker Mauth had to calculate more time for measuring complicated form cutters than for their grinding process. With the new 3D coordinate measuring machine Scope Check S from Werth Messtechnik, the relationship has changed. The production-related measurement system […]