Offline programming with TomoSim

Until now, teaching volume-based evaluations was not possible without a real test measurement. TomoSim is the first coordinate measuring software to simulate the tomography process offline using CAD data or a point cloud in STL format. The realistic simulation, taking into account the set CT parameters, enables the calculation of a volume including all significant artifacts. For example, an initial sample inspection program can be taught in at an offline workstation in parallel with the production of the first workpiece and the performance of other measurements on the machine using the WinWerth® measurement software. This allows TomoSim to speed up the process and reduce downtimes, e.g. for TomoScope® machines in multi-shift operation.
In addition to completing the program creation and feasibility check in time for the completion of the first workpiece, the simulation of the tomography process allows CT parameters to be tested and optimized. With the help of the simulated volume, significant artifacts, e.g. due to beam hardening or too few rotary increments, can be detected and, if necessary, an appropriate artifact correction can be selected. Another new feature is the complete offline programming of volume-based evaluations such as burr detection, void analysis, porosity analysis, text recognition, SurfaceScan Predefined or in volume sections. Simulation based on CAD models or STL point clouds and the workpiece material is also possible for multiple measurements and the simultaneous measurement of different workpieces.